Control Arms

Adjust front camber and caster ±1.5° on the Audi B9 platform with these forged aluminum adjustable control arms from SPC. OE style booted ball joints and bonded rubber bushings maintain factory ride, handling and noise, vibration, & harshness (NVH)...

This pair of patent pending adjustable front upper controlarms will give ±4° camber and ±4° caster change. SPC armsmatch the OE design for clearance so you can maximize camberchange without fender will interference. The rubber isolatedxAxis sealed flex jo

This pair of patent pending adjustable front upper controlarms will give ±4° camber and ±4° caster change. SPC armsmatch the OE design for clearance so you can get up to +2°camber change without fender well interference. If morepositive change is needed u

Make the non-adjustable lower control arms on your 996 or 997 Porsche adjustable for up to ±2° camber adjustment. This pair of 6061-T6 aluminum arms (2) from SPC will give easy on-the-car adjustability as well as get you track ready, while maintaining OE...

This pair of front upper control arms will give you +/- 1°caster and +/-2.5° camber change. Simply replace the OEfront upper control arms and dial in your suspension angleswith our patented sliding ball joint and caster plate.Whether you want to tune your

This popular adjustable upper control arm/shim kit has beenre-designed to match the SPC family of Nissan and Infinitiarms. Our new tubular design has reduced weight by 1 poundper arm and increased rigidity. SPC's arms are the only 350Zarms on the market t

Remove and replace your factory rear upper control arm with SPC's adjustable arm to make rear camber changes on your latemodel Honda. SPC's unique adjustment design permits on car adjustment of ±3.0° camber and is adjustable for life. SPC's forged...

Replace a word or bent rear lateral arm (OEnumber 551201MA0D) on the Infiniti Q50 and Q70 with SPC's high strength steel stock length control arm. Need toe adjustment? Consider SPC adjustable link number 72255.

Replace a word or bent rear Radius Rod (OEnumber 551B01MA0D) on the Infiniti Q50 and Q70 with SPC's high strength steel stock length control arm. Need set-back adjustment? Consider SPC adjustable link number 72250.

Replace a worn or bent rear lower control arm (OEnumber 551A01MA0D) on the Infiniti Q50 and Q70 with SPC's high strength stell stock length control arm. Need camber adjustment? Consider SPC adjustable link number 72245.

RS-R 13+ Scion FR-S / Subaru BRZ Rear Lower Control Arms

These Flat Coil Spring Mount/Spacer Plates are designed tomaximize your ride height options. Use thse plates ascoilover mounts to augment coil stability on SPC's tubulararms. If you need to fine-tune your ride height these platescan also be stacked to cha