SPC Performance

The 91990 is a simple method for tracking the rear dualtandems on trucks and tractors. It includes the 91896 "U"Bolt Extensions, a pair of Lo Profile Extension Bars(91877) and a pair of 91890 Tandem...

This set centers both steer axle wheels and brake drums tominimize wheel vibrations, brake pedal pulsations, and wheelhop. These sleeves are made specifically for the 'TAG' axleswith Accu-Ride 19.5"...

Stop wheel hop and vibrations on hub piloted wheels! Hubpilot hole diameter tolerances can allow wheels to beinstalled and tightened in an "off center" or clockedposition. The 32111 threadless wheel...

Stop wheel hop and vibrations on hub piloted wheels! Hubpilot hole diameter tolerances can allow wheels to beinstalled and and tightened in an "off center" or clockedposition. Designed for UD and...

For quick and easy removal of indentations on wheel flangesand rims of most vehicles. Allows proper tire seating,givinggreater tire protection and durability. This tool is powdercoated for added...

This tool is specifically designed for use on the Ford Superduty trucks as well as most other light trucks and vans aswell. The extra long bar gives you maximum leverage toloosen rusted sleeves...

This Hendrickson recommended OE style shims offersadjustments at 0, 3/16, and 3/8". Two per package.

This Hendrickson recommended OE style shims offersadjustments at 0, 1/8", 1/4" and 3/8". Two per package.

This shim kit will adjust the thrust angle onHendrickson's walking beam rear tandem axlesuspension. Improve tire wear and handling by adjustingthrust angle from 0" to 3/8" in precise 1/32"...

SPC Performance High-Strength 2-Piece Steel Rod End (3/4in.)

This tool makes rear toe adjustments easy on many late model Hondas. The 24mm wrench can also be used for rear toe adjustment on the Acura ILX or for rear camber adjustment on Mini Coopers.

This tool was specifically designed to remove the originalequipment ball joints on smaller cars when installing SPCPerformance's sliding ball joints. With this revolutionarydesign you can remove the...