SPC Performance

links Replacement pinch bolts included xAxis sealed flex joints replacing overly compliant OE inner bushings with a free pivoting, minimum compliance joint. Warning: You will also hear the...

These sockets are used on Chrylser products with screw inball joints. They have a 3/4" square drive and arefour-point, a perfect fit for our ball joints.

These sockets are used on Chrysler products with screw inball joints. They have a 3/4" square drive and arefour-point, a perfect fit for our ball joints.

Expand the service capability of your ball joint press withthis Master Ball Joint Adapter Set. This complete kitincludes the adapters and receiving tubes needed to work onGM, Ford and Dodge two and...

SPC Performance Ball Joint Assembly (End Only) for 81350/81355/81360/81365

Remove and replace ball joints without "brute force" methodsthat can cause costly damage. Now you can take on 4WD balljoint service in addition to servicing most cars. A forcingscrew-powered press,...

With SPC's rebuilt kit you can replace the ball joint or customize the stud length for ride height altered vehicles. Taper: 7.12°, Stud Length +0.25" Over OE. Includes: Ball joint boot, ball stud,...

With SPC's rebuilt kit you can replace the ball joint or customize the stud length for ride height altered vehicles. Taper: 9.5°, Stud Length: +0.25" over OE. Includes: Ball joint boot, ball stud,...

This heavy duty, drop forged alloy steel, lever-type balljoint and tie rod end remover provides good leverage actionto remove stubborn tie rod ends or break ball joint taperseasily. Use when space...

Five tools in one, this handy kit consists of three dropforged forks and two handles. One handle is for use with ahammer and one is designed to fit an air hammer. All forksare threaded to interchange...

Replacement balljoint for SPC 72270 front control arm.

The OE rear toe link bushing on many Subarus and the ScionFR-S can be easily removed when using the 67647 BushingPress Adapter. Our Eccentric Toe Bushings (part# 67660) canthen be installed using the...